Step 6: setting the date and time, Press the menu button – Sony HDR-FX1000 User Manual
Page 24
24
Step 6: Setting the date and time
Set the date and time when using this
camcorder for the first time. If you do not
set the date and time, [CLOCK SET] screen
appears every time you turn on your
camcorder or change the POWER switch
positions.
z
Tips
• If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the rechargeable battery and then set the
date and time again (p. 117).
Skip to step 4 when you set the clock for
the first time.
1
Press the MENU button.
2
Select
(OTHERS) by turning
the SEL/PUSH EXEC dial, then
press the dial.
3
Select [CLOCK SET] by turning
the SEL/PUSH EXEC dial, then
press the dial.
4
Set [Y] (year) by turning the SEL/
PUSH EXEC dial, then press the
dial.
You can set any year up to the year
2079.
5
Set [M] (month), [D] (day), hour
and minute, then press the dial.
The clock starts.
For midnight, set it to 12:00 AM.
For midday, set it to 12:00 PM.
SEL/PUSH EXEC dial
MENU button
PROG. SCAN
IRIS/EXPOSURE
GAIN SETUP
AGC LIMIT
MINUS AGC
WB PRESET
AWB SENS
OTHERS
RETURN
ASSIGN BTN
CAMERA PROF.
PHOTO/EXP.FOCUS
CLOCK SET
- - : - - : - -
WORLD TIME
LANGUAGE
QUICK REC
[
MENU
]
: END
CLOCK SET
[
MENU
]
: CANCEL
M
D
Y
12 : 00
AM
1
JAN
-
-
2008
-:--:--
CLOCK SET
[
MENU
]
: CANCEL
M
D
Y
12 : 00
AM
1
JAN
-
-
2008
-:--:--