Sony PCV-J150 - Manual (Page 46)

VAIO® Reference Manual 32
Removing a Memory Module
You may need to remove a memory module if you change the memory
configuration or replace a bad module.
1
Remove the left side cover (see “Removing the Side Panel” on
page 22).
2
Remove the power supply by lifting it up and resting it upside down
over the corner of the chassis where the CD-RW and floppy drives are
located.
!
Before opening the system unit, save any open files, exit the Windows
®
operating system, turn off the power of the computer and all attached
peripherals, and then unplug the power cord.
✍
The screw that secures the power supply to the chassis is the same screw that
secures the side panel to the chassis.
AUR001.VSD