Sony DVP-NS999ES - Manual (Page 34)

34
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 27 to
29 (
through ). Each of these is the
default setting and does not need to be adjusted
when you first connect the player. Refer to
page 75 for using the Setup Display.
Audio Connection (pages 26 to 29)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 81).
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 81).
• Set “DIGITAL OUT” to “ON” (page 81).
• Set “DISTANCE,” “LEVEL (FRONT),”
and “LEVEL (REAR)” according to the
connected speakers (page 83).
z Hints
• For connections
If the sound distorts even when the volume is
turned down, set “AUDIO ATT” to “ON” (page
80).
• For connections
Set “48kHz/96kHz PCM” to “96kHZ/24bit” only
if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency (page
82).
B D
A
B-1 C-1
B-2 C-2 D-2
D-1
B-1 C-1 D-1
B-2 C-2 D-2