Sony DVP-NS999ES - Manual (Page 59)

59
Sou
nd Adj
u
st
m
e
n
ts
SURROUND Mode
Settings
You can enjoy surround sound while playing
discs recorded in the Dolby Surround (Pro
Logic) format.
This function is available when you connect 4
or more speakers and set “REAR” in “SIZE”
of “SPEAKER SETUP” to any setting other
than “NONE.”
1
Toggle the scroll key up or down
during playback to display
“SURROUND” in the LCD screen.
2
Point the remote at the player and
press down on the scroll key so
that appears in the LCD
screen.
The following display appears.
3
Press down on the scroll key
repeatedly to select one of the
surround modes.
• NORMAL SURROUND
Discs with 2 channel audio signals are
decoded with the Dolby Surround (Pro
Logic) decoder to create surround effects.
The rear speakers will emit identical
monaural sounds. If you are using a
center speaker, the appropriate sounds for
the center speaker will be delivered.
• ENHANCED SURROUND
Provides a greater sense of presence from
a Dolby Surround (Pro Logic) source
with a monaural rear channel signal.
Produces a stereo like effect in the rear
channels.
To cancel the setting
Select “OFF” in step 3.
z Hint
You can also select “SURROUND” from the
Control Menu (page 14).
Notes
• If you use the DIGITAL OUT (OPTICAL or
COAXIAL) jack and set “DOLBY DIGITAL” to
“DOLBY DIGITAL,” and “DTS” to “DTS” in
“AUDIO SETUP,” sound will come from your
speakers but it will not have the surround effect.
• If the player is set up to output the signal from the
DIGITAL OUT (OPTICAL or COAXIAL) jack,
the surround effect will not be heard when you
play a CD.
Scroll key
NORMAL SURROUND
L: Front speaker (left)
R: Front speaker (right)
LS: Rear speaker (left)
RS: Rear speaker (right)
L R
RS LS