Sony KDX-46Q005 - Manual (Page 34)

Setting Up the TV
32
KDX-46Q005
2-592-150-12(2)
Cable and Antenna For best results, use this connection if you:
❑
Have a cable and an antenna.
(This is convenient if you are using a separate rooftop antenna to receive
additional channels that are not provided by your cable TV company.)
❑ Do not have a cable box or VCR. (If you have a cable box, see pages 33
and 34. If you have a VCR, see pages 37 and 38.)
Notes on Using This Connection
Antenna and CATV cable
Cable Type Connect As Shown
Cable TV
(CATV) and
Antenna
To Do This ... Do This ...
Switch the Media Receiver
Unit’s input between the cable
and antenna
Press ANT to switch back and forth between the
Media Receiver Unit’s VHF/UHF and CABLE
inputs.
✍
For optimum picture quality, a 75-ohm coaxial cable antenna connection
is highly recommended. Radio waves and other interference can easily
affect a 300-ohm twin lead cable, resulting in signal deterioration. If you
use a 300-ohm twin lead cable, keep it as far away as possible from the
TV.
✍
Do not use an indoor antenna, which is especially susceptible to radio
noise.
Antenna cable CATV cable