Sony KDX-46Q005 - Manual (Page 55)

Setting Up the TV
53
Se
tting
Up the
TV
KDX-46Q005
2-592-150-12(2)
DVD Player or
Digital Satellite
Receiver via an AV
Receiver with
CENTER SPEAKER
IN Terminals Use this connection if you have a digital audio device that is PCM/Dolby
Digital compatible, such as an AV receiver with a Dolby Pro Logic system
decoder.
Disconnect all power sources before making any connections.
1
Using a speaker cord, connect the TV’s CENTER SPEAKER IN
terminals to the AV receiver’s CENTER SPEAKER OUT terminals.
2
Using a component video cable, connect the DVD player or digital
satellite receiver’s YP
B P R jacks to the YP B P R jacks on the TV. Use the
HD/DVD IN 4 connections. Using an audio cable, connect the DVD
player or digital satellite receiver’s AUDIO OUT to the TV’s AUDIO IN
jacks.
3
Using an optical digital cable, connect the DVD player or digital
satellite receiver’s OPTICAL OUT jack to the AV receiver’s OPTICAL
IN jack.
✍
If your DVD player does not have component (YP B P R ) jacks, you can
connect the DVD player with A/V connectors. Use the connection
described on page 45.
✍
If your digital satellite receiver has an HDMI connector, use the
connection described on page 51 for best picture quality.
(Continued)