Sony PFM-500A2WU - Manual (Page 24)

24 24
(EN)
Adjusting the Picture
Notes
• CHROMA and PHASE controls do not function with
RGB signal.
• PHASE control does not function with component
signal.
• PHASE control does not function with PAL color
source.
• Do not change the CHROMA/PHASE (NTSC only)
level when the selected signal is not NTSC or PAL.
Although it gives no effect to the current picture, it
does affect the picture of the NTSC or PAL signal
which is input later.
Emphasizing the Contrast of the
Picture (Picture AGC Function)
When the intensity of the picture is low, this function
works to improve the contrast automatically.
Turn on this function when the image source is dark.
1
Press MENU.
The main menu appears on the monitor screen.
2
Press >/. to move the cursor (z) to “PIC
CONTROL” and press ENT.
The PIC CONTROL menu appears on the monitor
screen.
While watching the picture, you can adjust contrast,
brightness, chroma, and phase to suit your taste. The
adjustments can be carried out for each input signal
separately. You can also store the adjusted levels in
memory.
Adjusting the Contrast,
Brightness, Chroma, and Phase
Press MENU so that the main menu appears on the
monitor screen and select the “CONTRAST”,
“BRIGHTNESS”, “CHROMA”, or “PHASE” from the
PIC CONTROL menu with the
>/. buttons.
CONTRAST
Select the “CONTRAST” with the >/. buttons and
press the ENT button.
Adjust the contrast with the
>/. buttons in the range
from MIN (0) to MAX (+100).
>: to increase picture contrast
.: to decrease picture contrast
BRIGHTNESS
Select the “BRIGHTNESS” with the >/. buttons and
press the ENT button.
Adjust the brightness with the
>/. buttons in the
range from MIN (–50) to MAX (+50).
>: to make overall picture greenish
.: to make overall picture purplish
CHROMA
Select the “CHROMA” with the >/. buttons and
press the ENT button.
Adjust the chroma with the
>/. buttons in the range
from MIN (–50) to MAX (+50).
>: to increase color intensity
.: to decrease color intensity
PHASE
Select the “PHASE” with the >/. buttons and press
the ENT button.
Adjust the phase with the
>/. buttons in the range
from MIN (–50) to MAX (+50).
>: to make overall picture greenish
.: to make overall picture purplish
M A I N M E N U
P I C C O N T R O L
P I C S I Z E
C O N F I G
M E M O R Y
R E M O T E
S T A T U S
S E L E C T C A N C E L ENTER MENU
P I C C O N T R O L
C O N T R A S T : 8 0
B R I G H T N E S S : 0 0
C H R O M A : 0 0
P H A S E : 0 0
C O L O R T E M P : H I G H
P I C T U R E A G C : O N
R E S E T
S E L E C T C A N C E L ENTER MENU