Sony DSC-TX5 - Manual (Page 128)

Ta
ble
of
co
nte
n
ts
Op
e
rat
io
n
S
ear
ch
MENU/Settin
g
s
Se
ar
ch
In
de
x
128 GB
5 t (Print) t desired mode
6 Desired setting item t [Start]
• Movies cannot be printed.
• If the camera could not be connected to the printer, be sure to set [USB Connect] under [Main Settings]
to [PictBridge].
• Do not disconnect the cable for multi-use terminal while the (PictBridge Connecting) indicator
appears on the screen.
• When you disconnect the cable for multi-use terminal and close the cover of the camera, first close the
multi-connector cover, then close the battery/memory card cover.
This Image Prints the currently displayed image in single-image mode.
Multiple Images You can select and print multiple images.
After step 5, perform the following.
1 Touch the image to be printed.
Repeat the above steps until there are no more images to
be printed.
Touch an image with a
mark again to release the
mark.
2 Touch [OK] t [OK].
All in Date Range
All in This Folder Prints all images in the selected date range and folder at
once.
Touch [OK] after step 5.
Quantity Selects the number of copies of the specified image to be
printed.
• The designated number of images may not all fit onto a single
sheet depending on the quantity of images.
Layout Selects the number of images you want to print side by side
on a sheet.
Size Selects the size of the printing sheet.
Date Selects [Date] or [Day&Time] to insert the date and time
on images.
• When you choose [Date], the date will be inserted in the order
you select using [Date & Time Setting] on the camera. This
function may not be available depending on the printer.
Notes