Burst, About the recording of burst shooting images – Sony DSC-TX5 User Manual

Page 52

Advertising
background image

Ta
ble
of

co
nte
n

ts

Op
e

rat

io

n

S

ear

ch

MENU/Settin

g

s

Se
ar

ch

In

de
x

52

GB

Burst

The camera shoots up to 10 continuous frames in one burst when you hold down the shutter
button.

1 Lower the lens cover to switch to shooting mode.

2

(Burst)

t desired mode

When the buttons are not displayed on the left side of the LCD
screen, touch

.

• Burst mode is not available in the following situations:

– In Intelligent Sweep Panorama mode
– In Movie Mode
– In Anti Motion Blur mode
– In Hand-held Twilight mode
– In Backlight Correction HDR mode
– When the Smile Shutter function is activated
– In Easy Mode

• The flash is set to [Off].
• When recording with the self-timer, a series of a maximum of five images is recorded.
• The recording interval becomes longer, depending on the setting for the image size.
• [Focus], [White Balance], and [EV] are adjusted for the first image, and these settings are also used for

the other images.

• [VGA] image size will be set while recording on internal memory.
• When the battery level is low, or when the internal memory or a memory card is full, the burst stops.
• In slow shutter speed conditions, the burst of shots per second may be decreased.

(Off)

Records a single image.

(High)

Shoots up to 10 images per second in succession.

(Mid)

Shoots up to 5 images per second in succession.

(Low)

Shoots up to 2 images per second in succession.

Notes

z

About the recording of burst shooting images

After shooting burst images, the shot images are displayed in frames on the LCD screen.
When all the images are fitted in the frames, recording is completed.
You can stop the recording by touching [Cancel recording]

t [OK].

When stopped, the image displayed in index and images in the image processing are
recorded.

Advertising