Sony DSC-TX5 - Manual (Page 79)

Ta
ble
of
co
nte
n
ts
Op
e
rat
io
n
S
ear
ch
MENU/Settin
g
s
Se
ar
ch
In
de
x
79 GB
Display Burst Group
You can select to display burst images in groups or display all images during playback.
1 Press the (Playback) button to switch to
playback mode.
2 t (View Mode) t (Date View)
3 t (Display Burst Group) t desired
mode
(Display Main
Image Only)
Groups burst images, then plays back the main images only.
• When Face Detection is performed in burst mode, the camera
determines and displays the optimum image as the main image.
When Face Detection is not performed, the first image in the burst
group is displayed as the main image.
(Display All) Plays back all burst images one at a time.
z Displaying grouped burst images side by side
Only main images are displayed if [Display Main Image Only] has been set. You can
display a line-up of images by following the procedure below.
1 Display the main image in playback mode, then touch it.
The images are displayed in the index.
2 Touch / to display the desired image.
• You can also display the image by touching the thumbnail image at the bottom of the LCD
screen.
3 The display switches between single image display and thumbnail image display each
time you touch the screen.
4 To cancel the display, touch .
The image being displayed
above
Thumbnail image display Main image Single image display