Inserting batteries, Setting the clock, Inserting batteries setting the clock – Sony MHC-EC619IP User Manual
Page 10
10
GB
MHC-EC619iP.4-467-785-22(1)
Inserting batteries
Insert an R6 (size AA) battery
(supplied), matching the polarity
shown below.
Notes on using the remote control
With normal use, the battery should last
for about six months.
If you do not use the remote control for a
long period of time, remove the battery to
avoid damage from battery leakage and
corrosion.
Setting the clock
1
Press
to turn on the
system.
2
Press TIMER MENU to select
the clock set mode.
If “SELECT” appears, press
/
repeatedly to select “CLOCK,” and
then press (ENTER).
3
Press
/ repeatedly to set
the hour, then press .
4
Use the same procedure to
set the minutes.
Note
The clock settings are lost when you
disconnect the power cord or if a power
failure occurs.
To display the clock when the
system off
Press DISPLAY. The clock is displayed
for a few seconds.