Help guide – Sony SRS-X5 User Manual

Page 66

Advertising

Personal Audio System

SRS-X5

Selecting BLUETOOTH audio streaming playback quality

"Priority on stable connection" and "Priority on sound quality" modes are available as options for selecting the playback

quality of BLUETOOTH audio streaming. "Priority on stable connection" is the default setting.

Supported Codecs

Priority on stable connection: SBC (Default setting)

Priority on sound quality: AAC or aptX , SBC

1. Set the speaker to BLUETOOTH standby mode.

The

(power) indicator lights up in orange.

2. While holding the VOL (volume) + button, press the

(power) button until the

(BLUETOOTH) indicator

flashes white.

When the setting is changed to "Priority on sound quality" mode, the

(BLUETOOTH) indicator flashes 3 times in

white.

When the setting is changed to "Priority on stable connection" mode, the

(BLUETOOTH) indicator flashes 2

times in white.

Note

Communication may become unstable in the "Priority on sound quality" mode, depending on the setting of your

BLUETOOTH device and the ambient conditions. In this case, reset the speaker to the “Priority on stable connection”

mode by performing steps 1 and 2 above.