Sony DAV-X1V - Manual (Page 74)

74 US
2
Place the calibration mic so that the
“FRONT” side of it is pointed toward
the front speakers.
The front of each speaker should face
parallel to the calibration mic, and there
should be no obstruction between them.
3
Press FUNCTION +/– repeatedly until
“DVD” appears in the front panel
display.
4
Press DISPLAY when the system is
in stop mode.
The Control Menu appears.
5
Press X / x to select [AUTO
CALIBRATION], then press .
6
Press .
7
Press X / x to select [YES], then press
to start the auto calibration.
Be quiet during the measurement.
Note
• Avoid being in the measurement area and
making noise during the measurement (about 1
minute), to avoid measurement failure. During
the measurement, test signals are output from
the speakers.
• Reflections from walls or the floor may affect
measurements.
• If an error message appears, follow the message,
then select [YES].
An error message appears when:
– the calibration mic is not connected.
– front speakers are not correctly connected.
– subwoofer is not connected.
– the left and right speakers are reversed.
– the left and right of the calibration mic are
reversed.
Calibration mic
Top view
Front speaker (L) Front speaker (R)
Parallel
FRONT
START
T 0 : 0 3 : 0 4
3 ( 2 8 )
1 ( 4 4 )
DVD VIDEO
AUTO CALIBRATION
Connect calibration mic. Start
measurement?
YES
AUTO CALIBRATION
NO
Measuring. Please wait a moment.