Sony VRD-P1 - Manual (Page 13)

3-11(1)
13
VDR-P1 4-134-523-11(1)
by this
rded on
pre-
dirt or
he disc
rk.
he
econnect
d then
s not
mergency
when it
ke sure
dycam 
nnected
r.
ording or
On use and care
Do not use or store the unit and accessories in the
following locations:
Anywhere extremely hot, cold or humid.
Never leave exposed to temperatures above
60 ºC, such as under direct sunlight, near
heaters or in a car parked in the sun. They may
malfunction or become deformed.
Near strong magnetic fields or mechanical
vibration.
The unit may malfunction.
Near strong radio waves or radiation.
The unit may not be able to record properly.
On a sandy beach or anywhere dusty.
If sand or dust gets in the unit, malfunction or
irreparable damage may result.
On handling the casing
If the casing is soiled, clean it with a soft cloth
lightly moistened with water, and then wipe the
casing with a dry soft cloth.
Avoid the following to avoid damage to the
finish:
Chemicals such as thinner, benzene, alcohol,
chemical cloths, repellent, insecticide and
sunscreen
Handling the unit with the above substances
on your hands
Leaving the casing in contact with rubber or
vinyl objects for a long period of time
Transportation
Please repack the unit in its original carton when
shipping.
If the unit is to be shipped, remove any disc
beforehand.









Precautions
Condensation
Do not expose the unit to sudden temperature
changes. Do not use the unit immediately
after moving it from a cold to warm location
or raising the room temperature suddenly, as
condensation may have formed within the unit.
If the temperature changes suddenly while using
the unit, turn off the power and stop use for at
least one hour.
When moving the unit between temperature
extremes, place it in an air-tight plastic bag.
Allow at least one hour for the unit to adapt to
the ambient temperature before use.
Handling discs
Handle the discs only by the edges. Never touch
the playback/recording surface.
Do not affix labels on discs.
Do not store discs in dusty or humid locations,
in direct sunlight, or near heat generating
devices.
To protect important data, always keep discs in
their cases.
Do not wipe writable discs using a disc cleaner
before recording data. Instead, use a blower to
remove any dust.
Data may not be recorded properly if there
are scratches or dust on writable discs. Handle
discs very carefully.





