Sony VRD-P1 User Manual
Page 9
3-11(1)
9
VDR-P1 4-134-523-11(1)
ge 10)
Front side
Disc tray
ACCESS lamp
(eject) button
Emergency eject hole
If you cannot open the disc tray with the
(eject) button, insert a pin or straightened
paper clip into this hole to open the disc tray.
About the power supply
The power of the unit is supplied from the connected Handycam
. Make sure to connect the
Handycam
to a power outlet using an AC adapter. You do not need to connect the unit to a
power outlet.
Inserting a disc
The unit can open its disc tray only when it is connected to a Handycam
.
Press the
(eject) button to open the disc tray.
The disc tray opens only halfway. Open it fully by hand.
Place the disc on the disc tray, recording side down.
The disc should click into place.
Do not touch the recording
surface of the disc.
Push the disc tray to close.
Push the disc tray until it clicks.