Speaker system hookups 7, Speaker system hookups, Getting started – Sony STR-DE345 User Manual

Page 7: Where do i go next, Overview, Continued)

Advertising
background image

7

US

Getting Started

DVD player/Dolby Digital decoder

What cables will I need?
• Audio cable (not supplied) (1 for each 5.1 CH/DVD

FRONT and REAR jacks)

• Monaural audio cable (not supplied) (1 for each 5.1

CH/DVD CENTER and SUB WOOFER jacks)

• Video cable (not supplied) (1 for the 5.1 CH VIDEO

IN jack) (STR-DE345 only)

You can play decoded Dolby Digital soundtracks through the
speakers connected to the receiver
If you have a Dolby Digital decoder you can amplify a
decoded Dolby Digital soundtrack with the following
connections.

* STR-DE345 only

Where do I go next?

Go on to the next section to connect the speakers.

Speaker System Hookups

Overview

This section describes how to connect your speakers to

the receiver. Although front (left and right) speakers
are required, center and rear speakers are optional.
Adding center and rear speakers will enhance the
surround effects. Connecting an active woofer will
increase bass response. For specific locations of the
terminals, see the illustration below.

For optimum surround sound effect, place your

speakers as shown below.

What cords will I need?

Speaker cord (not supplied) (1 for each speaker)

Twist the stripped ends of the cord about 2/3 inch (15 mm).

Be sure to match the speaker cord to the appropriate
terminal on the components: + to + and – to –. If the cords
are reversed, the sound will be distorted and will lack bass.

White (L)
Red (R)

White (L)
Red (R)

Black

Black

Yellow

Yellow

FRONT

REAR

CENTER

WOOFER

PRE OUT

5.1 CH/DVD

FRONT

REAR

CENTER

SUB

WOOFER

L

R

Receiver

Dolby Digital

decoder, etc.

SPEAKERS REAR

SPEAKERS FRONT

SUB WOOFER

SPEAKERS CENTER

60 - 90 cm

Rear speaker

45

°

(+)

(+)

(–)

(–)

(continued)

Receiver

Dolby Digital

decoder, etc.

VIDEO

VIDEO IN

5.1 CH

Advertising