Sony MVC-CD500 - Manual (Page 58)

58
• When you select the one-push white balance
mode, the screen momentarily turns blue.
• When flash mode is set to (Forced flash), the
white balance is adjusted to the condition with
the flash emitting.
Adjusting the flash
level
— Flash Level
Mode dial: P/S/A/M/SCN
You can adjust the amount of flash light.
a Set the mode dial to P, S, A, M
or SCN.
b Press MENU.
The menu appears.
c Select [ ] (Flash Level) with
b / B , then select the desired
setting with v / V .
High: Makes the flash level higher
than normal.
Normal: Normal setting.
Low: Makes the flash level lower than
normal.
• You can carry out this operation even when the
mode dial is set to
(Clip Motion).
Shooting techniques
The subject coloring is affected by the
lighting conditions. For example, the entire
image appears blue under sunlight in the
summer, and white items gain a reddish tint
under incandescent light bulbs, etc. The
human eye can resolve these problems, but
digital still cameras cannot recognize the
correct colors without adjustments.
Normally, the camera makes these
adjustments automatically, but if recorded
image colors appear unnatural, we
recommend that you adjust the white
balance.
Mode dial
MENU
Control button