Sony MVC-CD500 - Manual (Page 72)

72
To stop slide show playback
Press z, select [Exit] with B, then press z
again.
To skip to the next/previous
image during the slide show
Press B (next) or b (previous).
• The interval setting time is approximate, and
may vary according to the playback image size.
Rotating still images
— Rotate
Mode dial:
You can rotate an image recorded in portrait
orientation and display it in landscape
orientation.
a Set the mode dial to , and
display the image to rotate.
b Press MENU.
The menu appears.
c Select [Rotate] with B , then
press z .
d Select with v , then rotate
the image with b / B .
e Select [OK] with v / V , then
press z .
To cancel rotation
Select [Cancel] in step 4 or 5, then press
z.
• You cannot rotate protected images and images
recorded as movies (MPEG Movie), Clip
Motion, Multi Burst and uncompressed (TIFF)
images.
• You may not be able to rotate images shot with
other cameras.
• When viewing images on a computer, the
image rotation information may not be
reflected depending on the application
software.
• If you rotate an image, the disc remaining space
will decrease.
• If the disc remaining space is not sufficient, you
may not be able to rotate an image.
Control button
Mode dial
MENU