Sony HDR-AX2000 - Manual (Page 72)

72
When you set this function to [ON]
(
), the displayed image becomes
about 1.5 times larger. The image quality
decreases because the image is digitally
processed. This function helps you to focus
on far-away subjects such as a wild bird
away at a distance. The default setting is
[OFF].
b Notes
• The function returns to the default setting when
you switch the format, perform the function by
the MODE button, or turn off the camcorder.
z Tips
• You can assign this function to an ASSIGN
button (p. 43).
You can add visual effects to transition
between scenes.
1 Select [WHITE FADER] or [BLACK
FADER] during standby to fade in with the
selected effect, or recording to fade out
with the selected effect.
2 Press the record button.
The fader indicator stops flashing and
disappears when the fading is complete.
To cancel before starting the operation,
select [OFF] in step 1.
The setting will be cleared every time you
press the record button.
WHITE FADER
BLACK FADER
b Notes
• This function is automatically set to [OFF] (the
default setting) when you switch the format,
perform the function by the MODE button, or
turn off the camcorder.
• You cannot set this function when the remaining
space of the memory card is less than 1 minute.
z Tips
• You can assign this function to an ASSIGN
button (p. 43).
When you set this function to [ON]
(
), you can record with the wider
color range. Your camcorder can reproduce
brilliant and vivid colors for flowers and the
beautiful blue-green of tropical oceans.
The default setting is [OFF].
b Notes
• The colors may not be well reproduced when
you play back a movie recorded with this
function set to [ON] on a TV that does not
support x.v.Color.
• You cannot set [x.v.Color] in the following
cases:
– When standard definition image quality (SD)
is selected.
– During recording movies
• When you set [x.v.Color] to [ON], the picture
profile will be disabled.
x ON/OFF
When you select [ON], you can display
color bars on the screen or record them on
the memory card. This function helps you
to adjust colors when you view movies
recorded with your camcorder on a TV or a
monitor. The default setting is [OFF].
b Notes
• This function is automatically set to [OFF]
when you turn off the camcorder.
• You cannot change the setting during recording
or expanded focus operation, or when fader is
set.
D.EXTENDER
FADER
Fading out Fading in
x.v.Color
COLOR BAR
Press the MENU button t select (CAMERA SET) with the SEL/PUSH EXEC dial.