Sony HDR-AX2000 - Manual (Page 91)

91
Tro
ubl
es
hoo
ting
Time code and other information appear on the display of the connected
device.
• Set [DISPLAY OUTPUT] to [LCD PANEL] while connected with the A/V connecting cable
(p. 79).
Dubbing cannot be done correctly using the A/V connecting cable.
• The A/V connecting cable is not connected properly. Make sure that the A/V connecting
cable is connected to the input jack of the other device for dubbing images from your
camcorder.
Sound cannot be added to the memory card after recording.
• You cannot add sound to the memory card after recording on your camcorder.
Dubbing cannot be done correctly using the HDMI cable.
• You cannot dub movies using the HDMI cable.
The computer does not recognize the camcorder.
• Disconnect the cable from the computer, then connect it again securely.
• Disconnect the cable from the computer, restart the computer, then connect the computer to
your camcorder correctly.
Movies cannot be viewed or copied to a computer.
• Disconnect the cable from the computer, then connect it again.
• You need to install the supplied “Content Management Utility” to copy movies from your
camcorder to your computer (p. 81).
The computer freezes.
• Disconnect the cable from your computer and camcorder. Reboot your computer, and
connect your computer and camcorder following the steps in the correct order (p. 81).
Dubbing/Editing/Connecting to other devices
Connecting to a computer