Avocent Cyclades-PR4000 - Manual (Page 40)

Cyclades-PR4000
40 Chapter 4 - Step-by-Step Instructions
Parameter Example Your Application
Secondary IP
Address 0.0.0.0 for none
Enable Dynamic
Local IP Address Yes, because the IP address of the
SWAN interface will be assigned
dynamically.
Remote IP Address
Type Any
Remote IP Address 0.0.0.0
IP MTU Use the preset value, 1500. This
determines whether or not a given IP
datagram is fragmented.
NAT Global Assigned because the IP
address of the SWAN interface will be
assigned dynamically.
ICMP Port Inactive
Incoming Rule List None, filters and traffic control are not
included in this example.
Outgoing Rule List
Name None, filters and traffic control are not
included in this example.
Routing of Broadcast
Messages Inactive
FIGURE 4.9 CONTINUED -- SWAN NETWORK PROTOCOL (IP) MENU PARAMETERS