Getting started, Playing the radio – Sony SRF-H3 User Manual

Page 2

Advertising
background image

Getting Started

Installing the Battery

(See Fig.

B)

1

While pressing the battery
compartment lid, slide it to open.

2

Insert one size AAA (R03) battery (not
supplied) with correct polarity.

3

To close the lid, press and slide the lid
down until it clicks.

When to replace the battery

Replace the battery when the sound becomes
weak or distorted. Remove the old battery and
insert a new one.

Battery life (approximate hours)

Sony

Sony

alkaline

size AAA

size AAA

(R03)

(LR03)

FM reception

80

40

AM reception

100

50

Notes on the battery

• Align the battery correctly.
• The dry battery cannot be charged.
• To avoid damage from possible battery

leakage, remove the battery when unit will
not be used for a long time.

Wearing the Radio
1

Pull out the support band fully from
the headband.

2

Adjust the headband and the support
band to fit your head.

Note on the support band

(See Fig. A)

When the radio not in use, put the support band
back by pushing down both ends as illustrated
and push it back underneath the headband.

Note on the light reflector
(See Fig.
A)

This reflector reflects a car light at night for your
safety.

Playing the Radio

1

Set POWER to ON.

2

Set BAND to select FM or AM.

For FM, set SENS to LOCAL if interference is
prevalent and reception is too strong. Under
normal condition, set it to DX.

3

Turn TUNE (tuning) to tune in a station.

4

Adjust the volume using VOL.

To turn off the radio

Set POWER to OFF.

AAA (R03) x 1

Head band

Light reflector

FM flexible
antenna

BAND

SENS

VOL

Driver
units

POWER

Support band

Insert the # side of the
battery first.

Battery
compartment

Dial scale

A

TUNE

B

Advertising