Sony XAV-601BT - Manual (Page 31)

31
To change the settings
1
While the list screen appears, touch
.
The menu list appears.
2
Touch .
The options are indicated below.
To return to the playback screen, touch or
“Cancel.”
Notes on USB playback
• MSC (Mass Storage Class) can be used.
• Compatible codecs are MP3 (.mp3), WMA
(.wma), AAC/HE-AAC (.m4a), JPEG (.jpg),
Xvid (.avi/.xvid), and MPEG-4 (.mp4).
• Backup of data in a USB device is
recommended.
Notes
• During USB Video playback, if the playback is
intermittent:
– Press (HOME) or launch the System settings.
– During the USB Photo, (Navigation), etc.
• Connect the USB device after starting the engine.
Depending on the USB device, malfunction or
damage may occur if it is connected before starting
the engine.
• A large-sized file or many files may take time to start
playing.
• This unit does not recognize multiple MSC devices.
To disconnect the USB device
Stop playback, then disconnect.
Do not disconnect during playback, as data in the
USB device may be damaged.
Notes on use
• Do not use USB devices so large or heavy that they
may fall down due to vibration, or cause a loose
connection.
• Do not leave a USB device in a parked car, as
malfunction may result.
• This unit cannot recognize USB devices via a USB
hub.
• Be sure to use the USB cable supplied with the
device if a cable is needed when making a USB
connection.
Notes on playback
• Select “USB Music,” “USB Video,” or “USB Photo”
depending on the file type of USB device.
• Displayed indications will differ, depending on the
USB device, recorded format and settings. For
details, visit the support site on the back cover.
• The maximum number of displayable music files is
as follows:
– files (tracks): 10,000
• It may take time for playback to begin, depending on
the amount of recorded data.
• DRM (Digital Rights Management) files may not be
played.
• During playback or reverse/fast-forward of a VBR
(Variable Bit Rate) MP3/WMA/AAC file, elapsed
playing time may not display accurately.
• Playback of a lossless compression file is not
supported.
“Slideshow interval settings”
Adjusts the time interval: “0.5 sec.” -
“20.0 sec..”
“Play continuously”
Sets continuous playback (slideshow).
“Update database”
Searches for picture files and adds them to the
database.
“About Photo viewer”
Displays the application version.