Sony XAV-601BT - Manual (Page 32)

32
iPod
For details on the compatibility of your iPod, see
“About iPod” on page 62 or visit the support site
on the back cover.
In these Operating Instructions, “iPod” is used as
a general reference for the iPod functions on the
iPod and iPhone, unless otherwise specified by
the text or illustrations.
Note
This unit does not recognize multiple iPods.
Playing an iPod
1
Reduce the volume on this unit.
If the iPod is turned off, turn it on.
2
Connect the iPod to the USB port.
Use of the optional USB connection cable
RC-202IPV is recommended.*
1
A connection process indicator appears on the
iPod screen*
2 , then playback starts from the
item last played.
If an iPod is already connected, to start
playback, touch “iPod.”
*1 To play videos from an iPod with video, use of
the RC-202IPV is required.
*2 May not appear in the case of an iPod touch or
iPhone being connected, or when the iPod was
last played using Passenger App Control.
3
Adjust the volume on this unit.
Note
If an iPod touch or iPhone is connected to this unit, a
display recommending application installation may
appear on this unit.
About playback controls and
indications
You can control iPod playback in the same way
as disc playback. For details, see “Playback
controls” on page 20.
For details on playback indications, see
“Playback indications” on page 21.
To stop playback
Press and hold (SOURCE/OFF) for 1 second.
To disconnect the iPod
Stop playback, then disconnect.
Do not disconnect during playback, as data in the
iPod may be damaged.
To enter ZAPPIN mode
For details on this procedure, see “Searching for
a track by listening to track passages —
ZAPPIN™” on page 34.
About resuming mode
When the iPod currently playing is connected to
the dock connector, the mode of this unit changes
to resuming mode and playback starts in the
mode set by the iPod.
In resuming mode, repeat/shuffle play are not
available.
Caution for iPhone
When you connect an iPhone via USB, telephone
volume is controlled by the iPhone itself. In order to
avoid emitting sudden loud sound after a call, do not
increase the volume on the unit during a call.
Note
This unit cannot recognize an iPod via a USB hub.
Tips
• When the ignition key is turned to the ACC position
with the unit on, the iPod will be recharged.
• If the iPod is disconnected during playback, “No
Device” appears on the display of the unit.
Listing up tracks/video files —
List
Selecting a track/video file
You can list up albums/folders/tracks/video files,
and select a desired one to play.
1
During playback, touch .
The list of categories or files from the
currently played item appears.
To move to the upper level, touch .
To scroll the list, move the scrollbar up and
down.
To search files by alphabetical order, touch
.
To return to the top screen, touch .
2
Touch the desired item.
Playback starts.