Sony XAV-601BT - Manual (Page 39)

39
By the call history
The unit stores the last 20 calls, allowing you to
select one quickly from the list.
1
Press (HOME), then touch “Phone.”
The Bluetooth Phone display appears.
2
Touch .
The call history list appears.
To scroll the list, move the scrollbar up and
down.
3
Touch the desired item in the list.
The contact confirmation display appears.
4
Touch .
The call is made and the calling display
appears until the other party answers.
By the preset dial
You can store up to 6 contacts in the preset dial.
For details on how to store, see “Preset dial” on
page 41.
1
Press (HOME), then touch “Phone.”
The Bluetooth Phone display appears.
2
Touch the number in the list (“1” to
“6”).
The contact confirmation display appears.
3
Touch .
The call is made and the calling display
appears until the other party answers.
By the voice dial function
You can make a call using the voice tag stored on
the connected cellular phone.
1
Press (HOME), then touch “Phone.”
The Bluetooth Phone display appears.
2
Touch .
3
Say the voice tag stored on the cellular
phone.
Your voice is recognized, then the call is
made.
The calling display appears until the other
party answers.
By the redial function
1
Press (HOME), then touch “Phone.”
The Bluetooth Phone display appears.
2
Touch .
The call is made and the calling display
appears until the other party answers.
Notes
• Say the voice tag in the same way as you stored it
on the cellular phone.
• If the voice dial function is activated on the
connected cellular phone, it may not work via this
unit.
• Do not use the voice dial function on the cellular
phone while it is connected to this unit.
• Noises such as the engine running may interfere
with sound recognition. In order to improve
recognition, operate under conditions where noise is
minimized.
• Voice dial may not work depending on the
recognition specification of the cellular phone. For
details, visit the support site on the back cover.
To adjust the talker’s voice volume
Press (VOL) +/– while making a call.
The level of the talker’s voice volume will be
stored into memory, independently from the
regular volume level.
Receiving calls
With the unit connected to the cellular phone,
you can receive a call in any status (except for
MirrorLink™ mode).
To answer the call
Touch .
To adjust the ringtone volume
Press (VOL) +/– while receiving a call.
The level of ringtone volume will be stored into
memory, independently from the regular volume
level.
To reject a call
Touch .
Note
The ringtone and talker’s voice are output only from
the front speakers.
Tips
• You can set to answer a call automatically (page 42).
• You can set to use the ringtone of the cellular phone
or this unit (page 42).
Operations during a call
To adjust the talker’s voice volume
Press (VOL) +/– during a call.
The level of the talker’s voice volume will be
stored into memory, independently from the
regular volume level.
To send DTMF (Dual Tone Multiple
Frequency) tones
Touch , then the required number keys.
To transfer the current call to the
cellular phone
Touch .
To transfer back to the handsfree call, touch
again.