Specifications, General, System requirements for using sensme – Sony CDX-GT66UPW User Manual

Page 29: Audio power specifications

Advertising
background image

29

Specifications

Tuner section

FM

Tuning range:

87.5 – 107.9 MHz

Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency:

25 kHz

Usable sensitivity:

8 dBf

Selectivity:

75 dB at 400 kHz

Signal-to-noise ratio:

80 dB (stereo)

Separation:

50 dB at 1 kHz

Frequency response:

20 – 15,000 Hz

AM

Tuning range:

530 – 1,710 kHz

Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency:

9,115 kHz or 9,125 kHz/5 kHz

Sensitivity:

26 μV

CD Player section

Signal-to-noise ratio:

120 dB

Frequency response:

10 – 20,000 Hz

Wow and flutter:

Below measurable limit

USB Player section

Interface:

USB (Full-speed)

Maximum current:

1 A

Power amplifier section

Output:

Speaker outputs

Speaker impedance:

4 – 8 ohms

Maximum power output:

52 W × 4 (at 4 ohms)

General

Outputs:

Audio outputs terminal (front/rear)
Subwoofer output terminal (mono)
Power antenna (aerial)/Power amplifier control
terminal (REM OUT)

Inputs:

Remote controller input terminal
Antenna (aerial) input terminal
Telephone ATT control terminal
AUX input jack (stereo mini jack)
USB signal input connector

Power requirements:

12 V DC car battery

(negative ground (earth))

Dimensions:

Approx. 178 Ч 50 Ч 180 mm

(7

1

/

8

Ч 2 Ч 7

1

/

8

in) (w/h/d)

Mounting dimensions:

Approx. 182 Ч 53 Ч 162 mm

(7

1

/

4

Ч 2

1

/

8

Ч 6

1

/

2

in) (w/h/d)

Mass:

Approx. 1.3 kg (2 lb 14 oz)

Supplied accessories:

Remote commander: RM-X211
Parts for installation and connections (1 set)

Optional accessories/equipment:

USB connection cable for iPod: RC-100IP

Your dealer may not handle some of the above
listed accessories. Please ask the dealer for
detailed information.

Design and specifications are subject to change
without notice.

System requirements for using
SensMe™

Computer

• CPU/RAM

– IBM PC/AT compatible machine
– CPU: Intel Pentium III Processor 450 MHz

or higher

– RAM: 256 MB or more (For Windows XP),

512 MB or more (For Windows Vista or
later)

• USB port

OS

Windows XP, Windows Vista, Windows 7

For details on compatible editions or Service
Pack, visit the support site on the back cover.

CEA2006 Standard
Power Output: 17 Watts RMS 4 at
4 Ohms < 1% THD+N
SN Ratio: 80 dBA
(reference: 1 Watt into 4 Ohms)

AUDIO POWER SPECIFICATIONS

Advertising