Sony DVP S9000ES - Manual (Page 36)

36
Using V
arious Functions with the Contr
ol Menu
Displaying the audio information of the
disc
When you select “AUDIO,” the channels being played are
displayed on the screen.
For example, in Dolby Digital format, multiple signals
ranging from monaural to 5.1 channel signals can be
recorded on a DVD. Depending on the DVD, the number
of the recorded channels may be different.
* “PCM,” “DTS” or “DOLBY DIGITAL” is displayed. In
case of “DOLBY DIGITAL,” the channels in the playing
track are displayed by numbers as follows:
For Dolby Digital 5.1 ch:
** The letters in the program format display mean the
following:
L: Front (left)
R: Front (right)
C: Center (monaural)
LS: Rear (left)
RS: Rear (right)
S: Rear (monaural) - the rear component of the
Dolby Surround processed stereo signal and the
Dolby Digital Signal.
LFE: LFE (Low Frequency Effect)
Front component 2
+ Center component 1
Rear component 2
LFE (Low
Frequency Effect)
component 1
Current
audio
format*
Current
playing
program
format**
DOLBY DIGITAL 3 / 2 . 1
DVD
AUDIO
1: ENGLISH
1 8 ( 3 4 )
1 2 ( 2 7 )
C 1 : 3 2 : 5 5
L R C
DOLBY DIGITAL 3/2.1
PROGRAM FORMAT
LFE
LS RS
Select: ENTER
PLAY
The display examples are as follows:
•PCM (stereo)
•Dolby Surround
•Dolby Digital 5.1ch
“LFE” is always enclosed in a solid line regardless of the
LFE signal component being output.
•DTS
“LFE” is always enclosed in a solid line regardless of the
LFE signal component being output.
1: ENGLISH
PCM 48kHz 24bit
PROGRAM FORMAT
AUDIO
Select:
ENTER
1: ENGLISH
AUDIO
Select:
ENTER
DOLBY SURROUND
DOLBY DIGITAL 2/0
L R C
S
PROGRAM FORMAT
1: ENGLISH
AUDIO
Select:
ENTER
L R C
DOLBY DIGITAL 3/2.1
PROGRAM FORMAT
LFE
LS RS
1: ENGLISH
AUDIO
Select:
ENTER
L R C
DTS 3/2.1
PROGRAM FORMAT
LFE
LS RS
Changing the Sound