Sony DVP S9000ES - Manual (Page 56)

56
Settings and Adjustments
x DIMMER
Adjusts the lighting of the front panel display and
indicators.
• BRIGHT: makes the front panel display bright.
• DARK: makes the front panel display dark.
• AUTO DARK: If you do not operate the player or
remote for a short while, the front panel display
becomes dark.
• AUTO OFF: If you do not operate the player or remote
for a short while, the front panel display turns off.
• OFF: This turns off the front panel display.
z You can directly turn on/off the front panel display by using
the remote
By pressing FL ON/OFF on the remote, you can turn on/off the
front panel display regardless the “DIMMER” setting (except
when it it set to OFF).
x PAUSE MODE (DVD only)
Selects the picture in pause mode.
• AUTO: Moving subjects are output with no jitter, and
still objects are shown at high resolution. The picture
remains clear even during slow playback when using
the shuttle ring (Clear Frame function). Normally select
this position.
• FIELD: A picture including subjects that move is output
with less jitter but at a lower resolution than “FRAME.”
• FRAME: A picture including subjects that do not move
dynamically is output with high resolution.
x CHROMA FILTER
This filter controls the level of the color (Chroma) element
of the image's video signal to control color saturation
level.
• OFF: This turns off the chroma filter. The filter is
normally set to off.
• ON: This turns on the chroma filter and adjusts the
color saturation level so that colors do not bleed.
Notes
• This function is not available when the player is set to output
progressive video signals.
• If you use the COMPONENT VIDEO OUT connectors, set
CHROMA FILTER to OFF to maintain accurate color
reproduction.
x PLAYBACK MEMORY
The player can store the SUBTITLE, VIDEO CONTROL
and other settings of each disc for up to 300 discs
(Playback Memory).
Set the Playback Memory function on or off.
• ON : stores the settings in memory when you eject the
disc or when you press ?/1 on the remote and the
player enters the standby mode with the disc still in the
player.
• OFF : does not store the settings in memory.
Custom Settings (CUSTOM SETUP)
CUSTOM SETUP
COMPONENT OUT:
DIMMER:
PAUSE MODE:
To set, press , then .
To quit, press .
INTERLACE
AUTO PLAY: OFF
BRIGHT
AUTO
OFF
TRACK SELECTION: OFF
ON
ENTER
PARENTAL CONTROL
DISPLAY
PLAYBACK MEMORY:
CHROMA FILTER
“CUSTOM SETUP” allows you to set the playback
conditions.
The default settings are underlined.
Select “CUSTOM SETUP” in the setup display.
x COMPONENT OUT
This will change the type of signal output from the
COMPONENT VIDEO OUT connectors on this player.
See page 71 for more information about the different
types.
• INTERLACE: This outputs the signal in interlace
format. Select this when you are connected to a
standard (interlace format) TV.
• PROGRESSIVE: This outputs the signal in progressive
(480p) format. Select this when you have a TV that can
accept progressive signals.
Note
If you select “PROGRESSIVE” when you connect the player to a
TV that cannot accept the signal in progressive format (480p), the
image quality will deteriorate. In this case, set the SCAN
SELECT switch on the back panel of the player to
“INTERLACE.” Then set “COMPONENT OUT” to
“INTERLACE” when you can see the TV screen correctly, and set
SCAN SELECT to “SELECTABLE.”
x AUTO PLAY
Selects the Auto Play setting when you connect the AC
power cord to the AC outlet.
• OFF: does not use “TIMER,” “DEMO1” or “DEMO2” to
start playback.
• TIMER: starts playing when the player is turned on, or
at any time you want when connected to a timer (not
supplied). Set the timer when the player is in standby
mode (the power indicator lights up in red).
• DEMO1: starts playing the first demonstration
automatically.
• DEMO2: starts playing the second demonstration
automatically.