Sony DVP S9000ES - Manual (Page 57)

57
Settings and Adjustments
Limiting Playback by Children (Parental
Control)
Playback of some DVDs can be limited depending on the
age of the users. The “Parental Control” function allows
you to set a playback limitation level.
Select “CUSTOM SETUP” in the setup display.
1 Select “PARENTAL CONTROL” using M/m, then press
ENTER.
x When you have not entered a password
The display for entering a password appears.
CUSTOM SETUP
To set, press , then .
To quit, press . ENTER
DISPLAY
COMPONENT OUT:
DIMMER:
PAUSE MODE:
INTERLACE
AUTO PLAY: OFF
BRIGHT
AUTO
OFF
TRACK SELECTION: OFF
ON
PARENTAL CONTROL
PLAYBACK MEMORY:
CHROMA FILTER
CUSTOM SETUP
PARENTAL CONTROL
Enter a new 4-digit password, then
press
.
To return, press .
To cancel, press . RETURN
ENTER
DISPLAY
CUSTOM SETUP
COMPONENT OUT:
DIMMER:
PAUSE MODE:
To set, press , then .
To quit, press .
INTERLACE
AUTO PLAY: OFF
BRIGHT
AUTO
OFF
TRACK SELECTION: OFF
ON
ENTER
PARENTAL CONTROL
DISPLAY
PLAYBACK MEMORY:
CHROMA FILTER
The following settings are stored in memory by the
Playback Memory function.
– AUDIO (page 35)*
– SUBTITLE (page 37)*
– ANGLE (page 37)*
– VIDEO CONTROL (page 38)
* DVD only
Notes
• The player can store the settings of up to 300 discs. When you
store the setting of disc number 301, the first disc setting is
canceled.
• Depending on the DVD, the information stored in the disc
takes priority over the Playback Memory settings and the
function does not work.
• Do not turn off the player by pressing POWER. Doing so may
cancel the settings. When you turn off the player, press x first
to stop playback and then press ?/1 on the remote. After the
power indicator lights up in red and the player enters standby
mode, press POWER on the player.
x PARENTAL CONTROL,
Sets a password and playback limitation level for DVDs
with playback limitation for children.
The same password is used for both Parental Control and
Custom Parental Control (page 43) .
For details, see “Limiting Playback by Children (Parental
Control) .”
x TRACK SELECTION
Gives the sound track which contains the highest number
of channels priority when you play a DVD on which
multiple audio formats (PCM, DTS or Dolby Digital
format) are recorded.
• OFF : No priority given.
• AUTO : Priority given.
Notes
• When you set this item to “AUTO,” the language may change
depending on the “AUDIO” settings in “LANGUAGE SETUP.”
The “TRACK SELECTION“ setting has higher priority than the
“AUDIO” settings in “LANGUAGE SETUP” (page 53).
• If you set “DTS” in “AUDIO SETUP” to “OFF”, the DTS sound
track is not played even if you set this item to “AUTO” and the
highest-numbered audio channel is recorded in DTS format.
• If PCM, DTS and Dolby Digital sound tracks have the same
number of channels, the player selects PCM, DTS and Dolby
Digital sound tracks in this order.
• Depending on the DVD, the audio channel with priority may
be predetermined. In this case, you cannot give priority to the
DTS or Dolby Digital format by selecting “AUTO.”