Sony DVP S9000ES User Manual
Page 65
65
Settings and Adjustments
VOL
1
4
7
2
5
8
0
3
6
9
Controlling AV receivers (amplifiers) with
the remote
1
Slide the TV/DVD switch to DVD.
2
Hold down ?/1, and enter your AV receiver’s
manufacturer’s code (see the table) using the
number buttons. Then release ?/1.
Code numbers of controllable AV receivers
(amplifier)
If more than one code number is listed, try entering them
one at a time until you find the one that works with your
AV receiver (amplifier).
Manufacturer
Code number
Sony
91 (default), 89
Denon
84, 85, 86
Kenwood
92, 93
Onkyo
81, 82, 83
Pioneer
99
Sansui
87
Technics
97, 98
Yamaha
94, 95, 96
Notes
• If you enter a new code number, the code number previously
entered will be erased.
• When you replace the batteries of the remote, the code number
may be reset to the default setting. Reset the appropriate code
number.
1
4
7
2
5
8
0
3
6
9
?
/1 (on/standby)
button
Number
buttons
TV/DVD
switch
Controlling the AV receiver (amplifier)
You can change the volume of the AV receiver (amplifier)
using VOL.
Note
Depending on the AV receiver (amplifier), you may not be able to
control your AV receiver (amplifier).