Sony PMC-DR45 - Manual (Page 28)

The Timer 28
Timer-recording
radio programs
You can set timer to record the radio at
a certain time. You can also record the
sound of the component connected to the
LINE IN jack, using the timer. Make sure
you have set the clock (see “Setting the
clock” on page 23).
Before you begin, make sure the (clock) indication is
not lit in the display. If it is lit, press STANDBY.
1
Tune in the radio station and insert a blank tape
into the tape compartment with the side you want
to record on facing up.
2
Press DIR MODE to
select recording
direction of the tape.
3
Press TIMER to display the indication.
Do the following operations by checking the
display window.
4
Press TUNE TIME SET + or – to display “RADIO”
“REC”, and press ENTER MEMORY.
Note
You cannot preset
recording timer and
waking up timer (page
25) at the same time.
Tip
When you receive the
AM program in step 1,
press z/X to check if
the noise is heard. If so,
press MODE to select
the position that most
decreases the noise.
Display
One side
Both sides
TUNE TIME SET –, +
ENTER
MEMORY
TIMER
STANDBY
DIR MODE