Sony SA-NS500 - Manual (Page 21)

21 GB
Ne
two
rk Co
n
n
e
c
tio
n
s
Setting Up Wired
Networks
Usually, the DHCP setting is set to ON when
you connect your computer to the network.
Try the following method if you are using a
wired network.
Set the DHCP setting of your computer to ON
in advance.
1
Check whether your computer
and router are turned on.
2
Connect the unit and the router
using a network (LAN) cable
(not supplied).
3
Connect the router and your
computer using a second
network (LAN) cable (not
supplied).
4
Turn the unit on.
The LINK indicator lights up in amber
when the connection is made.
Option 5: DHCP method
Network (LAN) cable
(not supplied)
Network
(LAN) cable
(not supplied)