ADTRAN L128 - Manual (Page 77)

Chapter 3: Terminal Menu Operation and Structure
60 Express L128/L128T User Manual 61202.070L1-1
Filter Defines /Pattern Filter Defines
Write security: 2; Read security: 3
The pattern filter is applied to bridge packets only. That is any packet which
is forwarded by the bridge functionality of the Express L128/L128T. Up to 32
pattern defines can be specified.
Name Identifies the filter entry
Offset Offset from beginning of packet of where to start
the pattern comparison
Pattern 64 bits used for comparison.
(hexadecimal format)
Mask Bits in the pattern to be compared.
(hexadecimal format)
Filter Defines /IP Filter Defines
Write security: 2; Read security: 3
The IP filter defines apply to any IP packet, whether it is routed or bridged. Up
to 32 IP defines can be specified.
Name Identifies the filter entry
IP Src IP address compared to the source address.
(dotted decimal format)
Src Mask Bits which are used in the source comparison.
(dotted decimal format)
IP Dest IP address compared to the destination address.
(dotted decimal format)
Dest Mask Bits which are used in the destination
comparison. (dotted decimal format)
Src Port IP source port number used for comparison
Range: 0 to 65535. (decimal format)
Src Port Cmpr Type of comparison that is performed
= - means ports equal to
not = - means port not equal to
> - means port greater than
< - means port less than
None - means the source port is not compared
Dst Port IP destination port number used for
comparison Range: 0 to 65535. (decimal format)