ADTRAN L128 - Manual (Page 83)

Chapter 3: Terminal Menu Operation and Structure
66 Express L128/L128T User Manual 61202.070L1-1
PAP, CHAP or EAP - The connection can be authenticated
using PAP, CHAP or EAP.
CHAP or EAP - The connection can be authenticated using CHAP
or EAP only.
EAP - The connection will only allow authentication by the peer using EAP.
Authentication/Tx Username
Write security: 1; Read security: 3
This is the username that is used when being authenticated by the PPP peer.
Authentication/Tx Password
Write security: 0; Read security: 1
This is the password or secret that is used when being authenticated by the
PPP peer.
Authentication/Rx Username
Write security: 1; Read security: 3
This is the username that is used to match the user to the Connection List pro-
file. During an incoming call, the Express L128/L128T will scan all active con-
nection profiles and match the received PPP peer’s username. If the name is
not found, then the DEFAULT profile is used, if and only if the DEFAULT
profile has nothing in the Rx Username parameter. During an outgoing call,
this username does not have to match the username reported by the PPP peer.
Authentication/Rx Password
Write security: 0; Read security: 1
This is the password or secret that is used to authenticate the PPP peer. This
is only necessary when Configuration/Security/Authentication = Connec-
tion List
.
Authentication/Caller ID
Write security: 1; Read security: 3
Incoming calls can be verified using the ISDN supplied caller identifier when
this is set to Yes. When set to No (def), the caller identifier is not checked.