Hydraulic or manual lift, Wheels, Hydraulic or manual lift -7 wheels -7 – Alamo A84B User Manual
Page 85: Assembly, Assembl y
Advertising
ASSEMBLY
A84B 03/07
Assembly Section 3-7
© 2007 Alamo Group Inc.
ASSEMBL
Y
HYDRAULIC OR MANUAL LIFT
Attach the Spring Assembly (Figure Asm-0038) to the lug on the mower deck behind the Center Gearbox.
Retain using 3/4 x 3 capscrews and locknuts. Install the Hydraulic Cylinder or the manual Ratchet Lift Screw
(Figure Asm-0039) between the Axle Center Lug and the Lug directly behind the Center Gearbox. Tighten the
two Bolts securely.
WHEELS
Install the Wheels on the Wheel Hubs. Note: If Laminated Tires are used, place the flat side of the Lug Nut
against the Wheel Figure Asm-R-0127. Note direction of travel and curvature of rubber segments in tire and
install as shown in Figure Asm-R-0127.
Advertising