Agilent Technologies EN 61000-3-2 - Manual (Page 15)

Installation - 2
15
Edit
Copy Table Copies highlighted information from the table to the Clipboard
Copy Graph Copies the presently displayed graph to the Clipboard
View
Main Lets you select the type of test to run
Test Setup > Lets you select the test set-up parameters
Pre-test Lets you run the pre-test
Test Lets you run the test
Display > Lets you view specific test results
Report > Lets you view the test report
Options
Local Lockout Lets you disable the front panel keys of the Agilent 6800-Series AC Power
Source/Analyzer.
Validation Mode Lets you run a special mode used to validate current harmonics testing
methodology.
Configure... Lets you specify the I/O slot address of the interface, the instrument address,
the interface type, and the Agilent 6800-Series AC Power Source/Analyzer
model number.
Defaults... Lets you view and change the default values for line voltage, frequency, and
test standards.
Mains
Auto On/Auto Off Automatically controls the output of the Agilent 6800-Series AC Power
Source/Analyzer while the test is running.
Auto On/Manual Off Lets you manually turn off the output of the Agilent 6800-Series AC Power
Source/Analyzer from the Test window. Provides automatic turn-on at the
beginning of pretests and tests.
Manual On/Auto Off Lets you manually turn on the output of the Agilent 6800-Series AC Power
Source/Analyzer from the Test window. Provides automatic turn-off at the
completion of pretests and tests.
Manual On/Manual Off Lets you manually control the output of the Agilent 6800-Series AC Power
Source/Analyzer from the Test window.
Help
Contents Accesses the Help contents.
Using Help Explains how to use the on-line help.
About Displays the Agilent 14761A HFTS software revision.
Mains ON/ Mains Off Indicates the present state of the ac source output.