Agilent Technologies EN 61000-3-2 - Manual (Page 82)

C - Command Summary
82
Command Syntax
CALCulate
:INTegral
:TIME <Nrf+>
:LIMit
:UPPer
[:DATA] <Nrf+>
:SMOothing <bool>
selects the Pst integration time for flicker measurements
sets various limits associated with rms voltage
fluctuation testing for IEC 1000-3-3
turns the 1.5 second smoothing filter on or off
FORMat
[:DATA] <type>
:BORDer <type> specifies the response data format ( ASCii | REAL )
sets the byte order of the floating point values returned
( NORMal | SWAPped )
MEASure
:ARRay
:CURRent
:HARMonic? <NRf+>
:VOLTage
:FLUCtuations
:FLICker? <NRf+>
:PST? <NRf+>
:ALL? <NRf+>
returns an array of current harmonic magnitudes
returns rms and instantaneous flicker values
returns Pst summary values
returns both rms/flicker and Pst summary values
SENSe
:CURRent
:PREFerence <type>
: WINDow
[:TYPE] <type>
sets the phase reference for current harmonic phase
measurements ( VOLTage | CURRent )
selects the window function used in the harmonic
measurements ( HANNing | KBESsel | RECTangular )
SYSTem
: CONFigure <mode> selects the operating mode of the HFTS system
( NORMal | IEC )