Panasonic WHMDC05F3E5 User Manual

Page 2

Advertising
background image

2

Table of contents

Safety precautions …………………………… 3-5

To adjust initial settings ……………………… 6-7

How to use ………………………………… 8-12

Maintenance …………………………………… 12

Troubleshooting ……………………………13-14

Information …………………………………… 15

Air-to-Water

Heatpump

(mono-bloc unit)

Power Supply

Solar Panel

Radiator

Shower

Fan Coil Unit

Floor

Heating

Water Tank Unit

Remote Control

Thank you for purchasing Panasonic product.

Before operating the system, read these operating instructions

thoroughly and keep them for future reference.

Before use, make sure the system has been installed

correctly by an authorised dealer according to the given

instructions.

Panasonic (Mono bloc) Air-to-Water Heatpump is designed to

operate with Panasonic Water Tank Unit. Unless used together

with the Panasonic Water Tank Unit, Panasonic does not

guarantee any normal operation nor the reliability of the system.

• These operating instructions describe how to operate the system

using the mono bloc unit.

• As for the operation of other products such as water tank,

radiator, external thermo controller, and underfloor units, refer to

the operating instructions of each product.

• System could be locked to operate in HEAT mode and disable

COOL mode.

• Some functions described in this manual may not be applicable

to your system.

• Consult your nearest authorised dealer for further information.

*

1

The system is locked to operate without COOL mode. It can be

unlocked only by authorized installers or our authorized service

partners.

*

2

Only displayed when COOL mode is unlocked

(Means when COOL mode is available).

The illustrations in this manual are for explanation purposes only and may differ from the actual unit.

They are subject to change without notice for future improvement.

Operating conditions

HEATING

*

1

COOLING

Water outlet temperature (°C)

(Min. / Max.)

25 / 55

5 / 20

Outdoor ambient temperature (°C)

(Min. / Max.)

-20 / 35

16 / 43

When the outdoor temperature is out of the

range in the table, the heating capacity will drop

significantly and the mono bloc unit may stop

operating for its protection.

The unit will restart automatically after the outdoor

temperature returns to the specified range.

System overview

Advertising