Panasonic WHMDC05F3E5 - Manual (Page 9)

9
Dealer Operation/settings to be done only by the authorised dealer/specialist.
User Operation/settings to be done by the authorised dealer/specialist or user.
Dealer
System temperature setting
Temperature setting Display
The system controls the temperature for each menu based on the
outdoor ambient temperature.
• To set or change the temperatures, make sure to contact your
nearest authorised dealer.
1 Press and hold for 5 seconds to enter the
temperature range setting mode.
(The display shows SETTING.)
2 Press or to select a menu.
3 Press to enter the menu.
4 Press or to set the desired temperature.
5 Press to confirm the setting.
• Repeat steps 2 to 5 to set other menus.
User
Checking the temperature range
1 Press and hold for 5 seconds to enter the temperature range setting mode.
2 Press or to select a menu.
• Press to exit.
Menu
Temperature
setting
Display
Setting of low outdoor ambient temperature. -15 °C ~ 15 °C
HEAT
Setting of high outdoor ambient temperature. -15 °C ~ 15 °C
Setting of water outlet temperature at low outdoor ambient
temperature.
25 °C ~ 55 °C
Setting of water outlet temperature at high outdoor ambient
temperature.
25 °C ~ 55 °C
During HEAT mode, the water outlet
temperature is adjusted as is shown the
diagram on the right.
It is performed within the preset temperature
range.
<Water outlet
temperature>
<Outdoor ambient temperature>
max. water temp.
min. water temp.
Setting of outdoor ambient temperature to turn OFF heating
operation during HEAT mode.
5 °C ~ 35 °C HEAT
Setting of outdoor ambient temperature to turn ON the backup
heater.
-15 °C ~ 20 °C HEATER
Setting of water outlet temperature during * 1 COOL mode. 5 °C ~ 20 °C * 1, * 2 COOL
Setting of sanitary water tank temperature. 40 °C ~ 75 °C TANK
* 1 The system is locked to operate without COOL mode. It can be unlocked only by authorized installers or our authorized service partners.
* 2 Only displayed when COOL mode is unlocked (Means when COOL mode is available).
English
How to use