Asante Technologies 1012 - Manual (Page 87)

Page 3-31
Configuration Menu System
Using the Edit Function
Figure 3-18 Editing the Forwarding Table
To use the Search Function, do the following:
1
Use the Left/Right arrow keys to select the Edit function.
Press return .
The table editor displays. Here you can add, delete, or
modify table entries.
2
Use the Left/Right arrow keys to select the editing func-
tion you want and then press return .
Add lets you add another address to the table. Selecting
the command opens the data entry bar, which will contain
the Ethernet address that is currently selected (high-
lighted) in the table. The editor will change over to a
Mod-
ify command if you enter a duplicate Ethernet address.
Delete removes the selected entry from the table. The edi-
tor asks you to confirm any deletion from the table. How-
ever, you cannot delete the management (MNG), broadcast
(BRC) or the spanning tree address (SPT).
Modify allows you to do the following:
• change the Ethernet address
• define the address static subcategory (permanent, delete
• on reset, delete on timeout)
• define the input port
• define the output port
Exit returns you to the original forwarding table display.