Inserting a battery, English – Panasonic RRUS310E User Manual

Page 7

Advertising
background image

VQT4R68

7

7

ENGLISH

Use an alkaline battery.

Remove the battery from the unit when you will not use
the unit for a long period of time.

1 AAA LR03 battery (not supplied)
Make sure and are correctly placed.

The remaining battery level is indicated as shown
below while the unit is operating.

Blinking

If the battery runs out, “

” blinks.

Replace the battery as soon as possible.

When the battery runs out of power, “

” is

indicated and then the power turns off automatically.

Depending on the battery state and the operation to be
performed, the unit may operate even after the power
has been turned off automatically. However, note that
the unit may suddenly turn off during operation due to
insufficient battery power.

A certain level of battery power is required to delete
files, format the unit (➜ page 13) or divide files

(➜ page 26). If any of these operations are performed

when the battery indicator is “

” (blinking), the power

will be turned off because the battery will run out of
power.

Turn the power off before removing the battery.

• If the battery is removed while the power is on, data

may be lost or the unit may be damaged.

Set the time after inserting a battery for the first time or
replacing the battery. (➜ page 9)

Inserting a battery

Battery
cover

Open the battery cover (

1

2

)

Close the battery cover
(

4

5

)

Advertising