Panasonic KXTGE240 - Manual (Page 15)

4 Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
09 30
5
*: Select “AM” or “PM”.
6
MSAVEN a MOFFN
Note:
R When English is selected as the display
language, 12-hour clock format is used.
When Spanish is selected, 24-hour clock
format is used.
Recording your greeting
message
Available for:
KX-TGE230/KX-TGE240 series (page 3)
You can record your own greeting message
instead of using a pre-recorded greeting
message. See page 39 for details.
1
MMENUN#302
2
MbN: “Yes” a MSELECTN
3
Record a greeting message. a MSTOPN
a MOFFN
Other settings
Smart function key ( key)
The Smart function key ( key) is located
on the bottom of the handset and informs you
with its flashing to allow you to activate the
following features by simply pressing this key.
n When the indicator flashes rapidly,
you can:
– Answer the call (outside call, intercom).
(page 18, 22)
– Stop paging. (page 21)
– Stop the alarm sound. (page 33)
n When the indicator flashes slowly in
standby mode, you can:
– Listen to new messages.
*1 (page 40)
– Listen to new voice mail messages.
(page 47)
– View the caller list when there are
missed calls. (page 38)
To activate these features, their Smart
function key must be “On”. (page 15)
*1 KX-TGE230/KX-TGE240 series: page 3
Using the Smart function key ( key)
When the indicator flashes rapidly/slowly,
press M N.
R The above features can be activated
depending the situation.
R If you answer a call using the Smart
function key, the speakerphone is activated.
R Even if the handset is placed on the base
unit or charger, the feature can be
activated. You can talk or listen to new
messages
*1 without lifting up the handset. If
you want to perform further operations, lift
up the handset.
R When the unit has new messages *1 , new
voice mail messages, and missed calls, the
unit can be operated to play the new
messages first, play the new voice mail
messages next, and then show the missed
calls.
*1 KX-TGE230/KX-TGE240 series: page 3
Setting the Smart function key
The Smart function key for the following
features must be “On”.
– “New message”
*1 (Default: On)
– “New VM” (Default: On)
– “Missed Call” (Default: Off)
The settings can be set for each handset.
*1 KX-TGE230/KX-TGE240 series: page 3
1
MMENUN#278
2
MbN: Select the desired setting and press
MSELECTN.
R “
” is displayed next to the selected
features.
R To cancel a selected feature, press
MSELECTN again. “ ” disappears.
For assistance, please visit http://www.panasonic.com/help 15
Getting Started
TGE21x23x24x(en)_1122_ver031.pdf15 15 2013/11/22 14:22:27