Panasonic KXTGE240 - Manual (Page 47)

Handset
1
MMENUN#330
R The speakerphone turns on.
2
Follow the pre-recorded instructions.
3
When finished, press MOFFN.
Note:
R You can also use the MACCESSN soft key,
if displayed, to play new voice mail
messages.
R If the handset still indicates there are new
messages even after you have listened to
all new messages, turn it off by pressing
and holding # until the handset beeps.
Base unit *1
*1 KX-TGE240 series: page 3
To listen to voice mail messages, you have to
dial your voice mail access number manually.
Using the Smart function key
When “Voice mail msg. via phone
co.” is displayed and the
indicator
flashes slowly, there are new voice mail
messages.
Press M
N in step 1 on “Listening to voice
mail messages”, page 46.
R “New VM” must be set to “On” in “Setting
the Smart function key”, page 15.
R When the unit has new messages *1 , new
voice mail messages, and missed calls, the
unit can be operated to play the new
messages first, play the new voice mail
messages next, and then show the missed
calls.
*1 KX-TGE230/KX-TGE240 series: page 3
Wall mounting
Note:
R Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
Base unit
1
Lead the AC adaptor cord and telephone
line cord through the hole in the wall
mounting adaptor in the direction of the
arrow.
2
Tuck the telephone line cord inside the
wall mounting adaptor (A). Connect the
AC adaptor cord and telephone line cord
(B).
1 AC adaptor cord
A
B
1
For assistance, please visit http://www.panasonic.com/help 47
Useful Information
TGE21x23x24x(en)_1122_ver031.pdf47 47 2013/11/22 14:22:29