Protect – Panasonic DMC-GH3KBODY User Manual
Page 205
205
Playback/Editing
•
The number of prints can be set from 0 to 999.
•
Depending on the printer, the date print settings of the printer may take precedence so check if
this is the case.
•
It may not be possible to use the print settings with other equipment. In this case, cancel all the
settings, and reset the settings.
•
When you set pictures in a group to [Print Set], the number of pictures added to [Print Set] and
the total number of pictures to be printed are displayed on the [Print Set] icon of the group’s top
picture.
•
You cannot use [Print Set] for the following pictures.
–
Motion pictures
–
Pictures taken with [
]
•
If the file is not based on the DCF standard, the DPOF print setting cannot be set.
You can set protection for pictures you do not want to delete by mistake.
1
Select [Protect] on the [Playback] menu.
2
Press 3/4 to select [Single] or [Multi] and then press [MENU/SET].
∫
Canceling all the [Protect] settings
1
Select [Protect] on the [Playback] menu.
2
Press 3/4 to select [Cancel] and then press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
•
The [Protect] feature is only designed to work with this camera.
•
Even if you protect pictures on a card, they will be deleted if the card is formatted.
•
Even if you do not protect pictures on a card, they cannot be deleted when the card’s
Write-Protect switch is set to [LOCK].
•
When you set pictures in a group to [Protect], the number of pictures with the [Protect] setting is
displayed on the [Protect] icon of the group’s top picture.
[Protect]
3
Select the picture, and then press
[MENU/SET].
•
The settings are canceled when
[MENU/SET] is pressed again.
•
Exit the menu after it is set.
[Single]
[Multi]
Press 2/1 to select
the picture.
Press 3/4/2/1 to
select the pictures.
6HW&DQFHO
1
2
3
4
5
6
6HW&DQFHO