Panasonic DMC-GH3KBODY User Manual

Page 275

Advertising
background image

275

Others

[Memory Card Error]/[Memory card parameter error]/[This memory card cannot be used]

> Use a card compatible with this unit.

(P31)

•

SD Memory Card (8 MB to 2 GB)

•

SDHC Memory Card (4 GB to 32 GB)

•

SDXC Memory Card (48 GB, 64 GB)

[Insert SD card again]/[Try another card]
•

An error has occurred accessing the card.

> Insert the card again.
> Insert a different card.

[Read Error/Write Error
Please check the card]
•

It has failed to read or write data.

> Remove the card after turning this unit off. Insert the card again, turn this unit on, and try

to read or write the data again.

•

The card may be broken.

> Insert a different card.

[Cannot record due to incompatible format(NTSC/PAL) data on this card.]

> If you want to delete some pictures, format the card after saving necessary data on a PC

etc.

(P52)

> Insert a different card.

[Motion recording was cancelled due to the limitation of the writing speed of the
card]
•

Use a card with SD Speed Class with “Class 4” or more for [AVCHD]/[MP4] motion picture
recording, and use “Class 10” for [MOV].

•

If recording stops even by using a card of the above specified SD Speed Class, the data
writing speed is decreasing. We recommend you make a backup, and then format

(P52)

.

•

Depending on the type of the card, motion picture recording may stop in the middle.

[A folder cannot be created]
•

A folder cannot be created because there are no remaining folder numbers that can be used.

> Format the card after saving necessary data on a PC etc.

(P52)

If you execute [No.Reset]

in the [Setup] menu after formatting, the folder number is reset to 100.

(P51)

[Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV]
•

Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect.

(P49)

•

This message also appears when the USB connection cable is connected to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer.

(P257

,

260)

Advertising