Panasonic DMC-ZS35W User Manual
Page 167
- 167 -
Others
[Failed to connect wireless access point]/[Connection failed]/[No destination found]
•
Check following regarding the wireless access point.
–
The wireless access point information set on this unit is wrong.
Check the authentication type, encryption type, and encryption key.
–
Power of the wireless access point is not turned on.
–
Setting of the wireless access point is not supported by this unit.
•
Check the network setting of the destination.
•
Radio waves from other devices may block the connection to a wireless access point.
Check other devices that are connected to the wireless access point and devices that use the
2.4 GHz band.
[No picture to send]
•
This is displayed when there is no image to transmit due to the restriction of the destination.
Check the file type of the image to transmit.
[Connection failed. Please retry in a few minutes.]/[Network disconnected. Transfer
stopped.]
•
Radio waves from the wireless access point are getting weak.
Perform the connection closer to the wireless access point.
•
There is no reply from the server or it has exceeded the communication processing time.
Try again after a while.
•
Depending on the wireless access point, connection may be automatically disconnected after
specific time has passed.
Reconnect the connection again.
[Connection failed]
•
Check following regarding the smartphones/tablet you intend to connect.
–
The smartphone/tablet does not operate.
–
Change the access point to connect to in the smartphone/tablet Wi-Fi settings to this camera.
–
There is no free storage space on the smartphone/tablet.
[Cannot get IP address. Please set wireless AP’s IP address setting to DHCP.]
•
Turn on DHCP settings of the IP address of the connected wireless access points.
[Cannot connect to server]
•
If a message is displaying asking to update the root certificate, agree to update the root certificate.