V. operation, Attaching or removing bat tery pack, Forward rotation switch operation – Panasonic EY75A2X User Manual

Page 10: Reverse rotation switch operation, How to use the belt hook

Advertising
background image

- 10 -

Attaching or Removing
Bat tery Pack

1. To connect the battery pack:
Line up the alignment marks and attach

the battery pack.

• Slide the battery pack until it locks into

position.

Alignment
marks

2. To remove the battery pack:

Pull the button from the front to release the
battery pack.

Button

V. OPERATION

WARNING!

• Do not inhale any smoke emitted from the

tool or battery pack as it may be harmful.

[Main Body]

Switch and Forward/Reverse
Lever Operation

Forward

Reverse

Switch lock

CAUTION:

To prevent damage, do not operate
Forward/Reverse lever until the bit
comes to a complete stop.

Forward Rotation Switch
Operation

1. Push the lever for forward rotation.

2. Depress the trigger switch slightly to start

the tool slowly.

3. The speed increases with the amount of

depression of the trigger for efficient tight-
ening of screws. The brake operates and
the bit stops immediately when the trigger
is released.

4. After use, set the lever to its center posi-

tion (switch lock).

Reverse Rotation Switch
Operation

1. Push the lever for reverse rotation. Check the

direction of rotation before use.

2. Depress the trigger switch slightly to start the

tool slowly.

3. After use, set the lever to its center posi-

tion (switch lock).

CAUTION:

• To eliminate excessive temperature

increase of the tool surface, do not oper-
ate the tool continuously using two or
more battery packs. Tool needs cool off
time before switching to another pack.

How to Use the Belt Hook

WARNING!

• Be sure to attach the belt hook securely to

the main unit with the screw firmly fastened.
When the belt hook is not firmly attached to
the main unit, the hook may disconnect and
the main unit may fall.

This may result in an accident or injury.
• Periodically check screw for tightness. If

found to be loose, tighten firmly.

• Be sure to attach the belt hook firmly and

securely onto a waist belt or other belt. Pay
attention that the unit does not slip off the
belt. This may result in an accident or injury.

EY7546_EY7547_EY7550_EY7551_US.indb 10

EY7546_EY7547_EY7550_EY7551_US.indb 10

2013-2-19 11:17:46

2013-2-19 11:17:46

Advertising
This manual is related to the following products: