Panasonic EY75A2X - Manual (Page 18)

- 18 -
VIII. ACCESSORIES
Use only suitable size of bit.
Panasonic original Optional Quick change chuck (EY9HX110E).
Chuck Size: 6.35 mm (1/4”) hex
IX. APPENDIX
MAXIMUM RECOMMENDED CAPACITIES
Model EY75A1 EY75A2
Screw driving
Wood screw 3.5 mm - 9.5 mm
Self-drilling screw 3.5 mm - 6 mm
Bolt fastening
Standard bolt: M6 - M16
High tensile bolt: M6 - M12
X. SPECIFICATIONS
MAIN UNIT
Model EY75A1 EY75A2
Motor voltage 14.4 V DC 18 V DC 14.4 V DC 18 V DC
No load speed
soft mode 0 - 1000 min -1 (rpm)
medium mode 0 - 1400 min -1 (rpm)
hard mode 0 - 2500 min -1 (rpm) 0 - 2300 min -1 (rpm)
Maximum torque 150 N•m (1330 in - lbs) 155 N•m (1370 in - lbs) 200 N•m (1770 in - lbs) 205 N•m (1815 in - lbs)
Impact per minute
soft mode 0 - 2000 min -1 (rpm)
medium mode 0 - 2800 min -1 (rpm)
hard mode 0 - 3000 min -1 (rpm) 0 - 3500 min -1 (rpm)
Overall length 143 mm (5 - 5/8”) 155 mm (6 - 1/8”)
Weight (with battery pack: EY9L44) 1.55 kg (3.42 lbs) - 1.55 kg (3.42 lbs) -
Weight (with battery pack: EY9L45) 1.55 kg (3.42 lbs) - 1.55 kg (3.42 lbs) -
Weight (with battery pack: EY9L50) - 1.65 kg (3.64 lbs) - 1.65 kg (3.64 lbs)
Weight (with battery pack: EY9L51) - 1.65 kg (3.64 lbs) - 1.65 kg (3.64 lbs)
Tightening torque will vary, even with
the same bolting material (e.g. steel),
accord ing to the surface finish.
Torque is greatly reduced when the bolt
and nut start turning together.
5) Socket play
Torque is lowered as the six-sided configu-
ration of the socket of the wrong size is
used to tighten a bolt.
6) Switch (Variable speed control trigger)
Torque is lowered if the unit is used with
the switch not fully depressed.
7) Effect of Connecting Adaptor
The tightening torque will be lowered
through the use of a universal joint or a
connecting adaptor.
EY7546_EY7547_EY7550_EY7551_US.indb 18 EY7546_EY7547_EY7550_EY7551_US.indb 18 2013-2-19 11:17:49 2013-2-19 11:17:49