Panasonic EY75A2X User Manual

Page 8

Advertising
background image

- 8 -

unless absolutely necessary.
Use of improper extension cord could
result in a risk of fire and electric shock.
If extension cord must be used, make
sure that:

a. pins on plug of extension cord are

the same number, size and shape as
those of plug on charger.

b. extension cord is properly wired and

in good electrical condition.

c. wire size is large enough for ampere

rating of charger as specified below.

RECOMMENDED MINIMUM AWG SIZE OF

EXTENSION CORDS FOR

BATTERY CHARGERS

AC Input Rating.

Amperes

AWG Size of Cord

Equal to or
greater than

But less
than

Length of Cord,
Feet

25

50 100 150

0

2

18

18

18

16

8) Do not operate charger with damaged

cord or plug-replace them immediately.

9) Do not operate charger if it has received

a sharp blow, been dropped, or other-
wise damaged in any way; take it to a
qualified service personnel.

10) Do not disassemble charger; take it

to a qualified service personnel when
service or repair is required. Incorrect
reassembly may result in a risk of
electric shock or fire.

11) To reduce the risk of electric shock,

unplug charger from outlet before
attempting any maintenance or cleaning.

12) The charger and battery pack are

specifically designed to work together. Do
not attempt to charge any other cordless
tool or battery pack with this charger.

13) Do not attempt to charge the battery

pack with any other charger.

14) Do not attempt to disassemble the

battery pack housing.

15) Do not store the tool and battery pack

in locations where the temperature
may reach or exceed 50°C (122°F)
(such as a metal tool shed, or a car
in the summer), which can lead to
deterioration of the storage battery.

16) Do not charge battery pack when the

temperature is BELOW 0°C (32°F)
or ABOVE 40°C (104°F). This is very
important in order to maintain optimal
condition of the battery pack.

17) Do not incinerate the battery pack. It

can explode in a fire.

18) Avoid dangerous environment. Do not

use charger in damp or wet locations.

19) The charger is designed to operate on

standard household electrical power
only. Do not attempt to use it on any
other voltage!

20) Do not abuse cord. Never carry charger

by cord or yank it to disconnect from
outlet. Keep cord away from heat, oil
and sharp edges.

21) Charge the battery pack in a well

ventilated place, do not cover the
charger and battery pack with a cloth,
etc., while charging.

22) Use of an attachment not recommended

may result in a risk of fire, electric
shock, or personal injury.

23) Do not short the battery pack. A battery

short can cause a large current flow,
over heating and create the risk of fire
or personal injury.

24) NOTE: If the supply cord of this

appliance is damaged, it must only be
replaced by a repair shop authorized
by the manufacturer, because special
purpose tools are required.

25) TO REDUCE THE RISK OF ELECTRIC

SHOCK, THIS APPLIANCE HAS A
POLARIZED PLUG (ONE BLADE IS
WIDER THAN THE OTHER).

This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to
install the proper outlet. Do not change
the plug in any way.

EY7546_EY7547_EY7550_EY7551_US.indb 8

EY7546_EY7547_EY7550_EY7551_US.indb 8

2013-2-19 11:17:46

2013-2-19 11:17:46

Advertising
This manual is related to the following products: