Panasonic HX-A500H - Manual (Page 26)

26
SQT0251 (ENG)
To provide a Wi-Fi connection example, this basic owner’s manual describes the procedures from
setting up a direct connection between this unit and a smartphone to getting them ready for remote
operation.
≥ Please refer to the owner’s manual (PDF format) of this unit for details about the setting/operating
of this unit.
≥ Please refer to the operating instructions of the device in use for details about the setting/
operating of the wireless access point or smartphone.
∫ This unit is NFC-compatible
Using the NFC (Near Field Communication) function, you can easily transfer data necessary for a
Wi-Fi connection between this unit and the smartphone.
This function can be used with the NFC compatible device with Android
™ (OS version 2.3.3 or
later). (Except for some models)
Install the “Image App”
* The supported OS versions are current as of April 2014 and subject to change.
≥ Use the latest version.
≥ The service may not be able to be used properly depending on the type of smartphone being
used. For information on the “Image App”, check the support website below.
http://panasonic.jp/support/global/cs/e_cam/index.html
(This Site is English only.)
≥ When downloading the app on a mobile network, high packet communication fees may be
incurred depending on the details of your contract.
Wi-Fi
Wi-Fi
®
function
About the “Image App”
The “Image App” is an application provided by Panasonic.
For Android apps For iOS apps
OS Android 2.3.3 or later * iOS 5.0 or later *
Installation
procedure 1 Connect your Android
device to a network.
2 Select “Google Play™
Store”.
3 Enter “Panasonic Image
App” into the search
box.
4 Select “Panasonic
Image App” and install
it.
≥ The icon will be added
to the menu.
1 Connect your iOS
device to a network.
2 Select “App Store
SM
”.
3 Enter “Panasonic Image
App” into the search
box.
4 Select “Panasonic
Image App” and install
it.
≥ The icon will be added
to the menu.
HX-A500-SQT0251_mst.book 26 ページ ２０１４年４月１４日 月曜日 午後６時１５分